International Flange Connections
MDESIGN connects ASME and DIN
An American-standard flange, bolts from the European inventory: With MDESIGN 2026 Build 261010, such combinations can now also be analyzed in flange calculations according to EN 1591.
Different Standard Systems. A Common Flange Calculation.
A German plant manufacturer supplies equipment to North America, a European plant takes over a facility from the U.S., or an international corporation wants to standardize fasteners across its locations. In such projects, different standards systems come into play. For example, Flange are designed according to ASME, while metric screws are predominantly available for assembly and maintenance.
This creates an additional challenge for designers: The connection must comply with technical specifications, while at the same time making use of existing components and established procurement channels wherever possible. Different standard systems can limit the selection of suitable screws and materials.
With the new MDESIGN 2026 Build 261010, these limitations can be handled more flexibly during flange calculations. Design engineers can combine components from European and American standard systems within a single calculation scenario and evaluate alternative designs from a technical perspective.
Design engineers can use it to consider components available across multiple locations, verify different combinations of standards, and select suitable solutions for their flange connections.
Combining ASME-Flange s with metric screws
This extension allows for the joint calculation of ASME flanges with metric bolts, as well as flanges conforming to European standards with bolts from the American standard system.
This is particularly relevant when fasteners are to be sourced in the respective sales or production country. Instead of purchasing a specific type of screw from abroad, it is possible to determine whether a locally available alternative also meets the technical requirements. This also creates additional opportunities for global companies seeking to standardize their screw inventories.
However, the wider selection does not mean that the components are fully interchangeable. Bolt dimensions, hole geometry, material properties, and preload forces must be compatible with the respective flange connection. Calculations in accordance with EN 1591 make it possible to evaluate suitable combinations in terms of their strength and leak tightness.
This allows designers to take into account, even during the design phase, which components are available at different locations and whether alternative bolted connections are technically feasible.
International Materials and Sealing Data
As the range of possible combinations expands, so does the importance of a suitable data foundation. Build 261010 therefore expands the range of materials, seal data, and other input options in flange calculations.
More Materials
The materials database has been expanded to include ASME/ASTM materials for bolts and Flange . This makes additional international material data directly available for design purposes.
New Sealing Data
In addition, gasket data from the manufacturers Flexitallic and KLINGER A. W. Schultze are available. The pressure level used to determine the gasket characteristics can be selected more flexibly, allowing for additional gasket configurations to be taken into account.
More Flexible Design
Safety factors can now be specified freely. In addition, the conversion of modulus of elasticity values at elevated temperatures has been adjusted, and the loading time for the assembly in the 3D configurator has been reduced.
MDESIGN 2026 Build 261010 Now Available
The new MDESIGN 2026 Build 261010 is now available to existing customers with an active service contract via the customer forum. To match the current version of MDESIGN Explorer, MDESIGN Author 2026 with Build 261010 has also been released.